Product photo
Embedded Power System
XMI-HR Series · Intelligent AC and DC integrated power supply with 48VDC · Standard 19-inch rack-mount (supports wall-mounted and embedded installation) · AC 220V and DC 48V outputs can be used simultaneously (AC and DC isolated).
Model: XMI-HR Series (XMI10HR / XMI20HR / XMI30HR / XMI60HR / XMI100HR / XMI150HR)
Power range
1kVA–15kVA
Output
Pure sine wave · 220VAC ±2% (inverter mode) · DC 48V output (AC/DC isolated)
Input
176–250VAC (settable) · 50Hz ±5% · PF ≥0.99 · DC 48V
Switching time
≤10ms
| Parameter | Value |
|---|---|
| Series | XMI-HR |
| Power range | 1kVA–15kVA |
| Models | XMI10HR · XMI20HR · XMI30HR · XMI60HR · XMI100HR · XMI150HR |
| AC input voltage | 176–250VAC (settable) |
| Input frequency | 50Hz ±5% |
| Input power factor | ≥0.99 |
| DC voltage | 48VDC |
| Output power factor | 0.8 |
| AC output voltage (inverter mode) | 220VAC ±2% |
| Output waveform | Pure sine wave (inverter mode) |
| Output frequency (inverter mode) | 50Hz ±0.25Hz |
| THDu | ≤3% (linear load under full load) |
| Switching time | ≤10ms |
| Efficiency (inverter mode) | ≥90% (inverter mode) |
| Overload | 125% rated load: protection after 1 min · 150% rated load: protection after 10 sec |
| Battery rated voltage | 48VDC |
| Charging voltage range | 53–59VDC (settable) |
| Charging current | 6A / 20A / 30A / 50A (depends on configuration) |
| Low-voltage warning | 43VDC ±0.5VDC |
| Under voltage | ≤40VDC |
| Overvoltage protection point | ≥60VDC |
| Overvoltage recovery | ≥55VDC |
| Cooling | Built-in fan · intelligent speed regulation according to load |
| Protection | Over/under voltage · overload · short circuit · over temperature · reverse connection · surge and lightning protection |
| Communication | Standard RS485/RS232 · SNMP optional · Dry contact alarms (mains failure / low battery / system alarm) |
| Dimensions (W×D×H) | 482.6×350×44.5mm (1U) · 482.6×500×88mm (2U) · 482.6×492×222mm (5U) |
| Weight | <10kg / <20kg / <30kg / <50kg (depending on model) |
| Minimum order | 88 |